Bi Folding Gates

Every effort has been made in preparation of this sheet however we hold no responsibility for errors or omissions.

Where the use of conventional swinging gates are not feasible due to space restrictions, the PF9000 Automatic Cantilevered Sliding Gate is an easy to install and ideal solution.

We offer a bespoke service from design to manufacture where we can supply a custom built gate to match existing fencing / surroundings ensuring that the finished product is exactly what is required.

• BF001 - Bi Folding Gate BF001 - Bi Folding Gate
• BF002 - Bi Folding Gate BF002 - Bi Folding Gate
• BF003 - Bi Folding Gate BF003 - Bi Folding Gate
•  

Click to view video

The standard round tube infill can be replaced by a variety of infill options including D or W profile palisade pales, timber panels, solid sheeting and various mesh panels to integrate perfectly with all fence types.

A Manual Release Mechanism, concealed within the lockable housing unit, is included as standard, allowing manual control of the gate in the event of a power failure.

To aid in the safety aspect of the Automatic Cantilevered Sliding Gate the portal is fitted with dual-height photo cells and rubber profile safety edges.

The gate is operated by a Programmable Logic Controller, operated via an inverter, which allows for programming of various parameters like gate speed, passage timeout, automatic opening times, free exit loop operating times etc.

Proximity sensors mounted in the main portal read the moving beam so as to indicate the start and end of the travel cycle.

Towards the back of the gate’s opening area a floor mounted support roller handles the weight of the gate in the fully open position.

Anti-climb spikes are fitted as standard to gates over 1500mm high.

Installation/building requirements

The PF9000 heavy-duty automatic sliding gate is fully assembled and tested within the production factory, thus minimising the disruption on site. The gate will be delivered ready to be lowered on to the pre-installed concrete plinths.

The PF9000 Automatic Cantilever Gate unique to our brand the PF9000 is a pioneering concept using a simple yet reliable design it uses an external friction drive mechanism.

The PF9000A Automatic Sliding Gate

PF9000ASpecification Sheet

Dual-height photo cells are fitted as standard, for safety to pedestrians and vehicles, on all our PF9000 Heavy-Duty Automatic Sliding Gates. A Programmable Logic Controller, operated via an inverter, allows the user to adjust many settings to their individual requirements.

Specification:

CE Approved BS/EN 12453

Dimensions:

250mm x 225mm extruded Aluminium beam

Infill —30mm diameter x 6mm Wall thickness

Power Requirement:

230v, Single Phase, 50Hz, 10 Amps

Drive Motor:

0.75KW’s - 1.1KW’s, 3 Phase

Maximum Span:

10 Metres Drive-Through

(14.5 Metres overall) Single Leaf

Maximum Height

2.4 Metres (maximum width 10.0 metres)

3.0 Metres (maximum width 6.0 metres)

Duty Cycle:

100%

Operation Time:

4 Seconds per metre (Variable)

Finish:

Steel Components:

ŸShot Blasted

ŸZinc Phosphate immersion coated

ŸZinc Primer

Ÿ2K PU Finish

Aluminium Components:

ŸAbraded

Ÿ2K PU Finish

Operation:

Friction-driven 3 phase motor via Inverter and

Programmable Logic Controller

Access Controls:

Proximity Card Readers and Controllers, Keypads,

Remote Control Transmitters, Push-Button control Raise/Stop/Lower,

Intercom Systems, Video Systems,Token Acceptors, Counting Systems etc.

BS/EN 12453 Compliant:

The PF9000 complies with safety features announced under the EU standards and regulations. Six profiled Safety Edges are provided; each consisting of 2 parallel electrically conducted rubber strips. These are connected to the main control  panel by two cables, which are concealed within the lower beam, which transmit messages to and from the safety edges. In the unlikely event of a fault, messages will be transmitted to the necessary safety edges instructing the gate to be stopped, regardless of its current operation.

Don’t forget to ask about all the different access control kit that we can supply. In the majority of scenarios we will pre fit this equipment with your order cutting down the labour time on site. We offer endless combinations of access control.

Remember that we offer a gate that suits all applications. Our range currently consists of PF9000 Automatic Cantilever Gates, PF9000 Manual Cantilever Gates, PF9200 Manual or Automated Swinging Gates and our PF9500 Automatic Bi-Folding Speed Gates. All have different advantages and niche applications so for the best advice give us a call on:

Every effort has been made in preparation of this sheet however we hold no responsibility for errors or omissions.

Electric Motor:

400v 50hz 3 phase (Braked Motor)

4 pole

IP54

B14 C face mounted

Frame size 80

Output power: 0.75kW

Current @ 400v: 2.2A

Rated speed: 1400rpm

Full-load power factor(cos): 0.67

Ts/Tn: 2.5

Is/in: 4.3

DC Brake In (mA): 150

Zo (starts/hour): 15000

Moment of inertia (Jx 10-4 Kgm2): 17.19

Max brake torque (Nm): 18

Net weight 15kg

Geared Motor Spec:

Type: Worm & Wheel

Overall speed: 200 rpm

Max rated torque: 320nm

Actual torque: 32nm

Gearbox efficiency: 90%

Output size: 30mm

Mounting position: V5

Angular Backlash: 20’ +/- 5’ / 0.00582 +/- 0.00145

Lubricated with: Shell Tivela S320 0.48 litres

PF9000ASpecification Sheet